Thank you for choosing Gunstreet. below is the instructions for a Volume Bleed Wiring to be installed in your sg.

sg instructions vb

Most Common Pickup Wires

Key


H1=

Hot Output

G1=

Ground

 

1470946942-picsay (2).png

how to install sg volume bleed hot.jpg

Stage One

Bridge Volume Install

Solder the Hot Pickup wire to the First Lug on the potentiometer.  See diagram on the left. If not sure which wire is hot please refer to your pickups manufacturers instructions


Next, Solder the pickups Ground to the casing of the Volume Pot.

Repeat these steps for the Neck Volume

how to install sg volume bleed bridge ground.jpg

1488517719369.jpg

Neck Volume Install

Just like the Bridge Volume install. Solder the Hot Pickup wire to the First Lug on the potentiometer. 

how to install sg volume bleed neck hot.jpg

how to install sg volume bleed ground.jpg
1488513572169.jpg

Next, Solder the pickups Ground to the casing of the Volume Pot.


Grounding the Harness

Solder the Ground Wire coming from your guitar bridge to the Casing of any pot

That's It!

how to install sg volume bleed ground.jpg


If you have any questions feel free to contact us!