FREE SHIPPING ON ALL DOMESTIC ORDERS $75+
How to install
Neck Pickup 1: Coil Finish Ground
Solder your neck pickups Coil Finish (Black on Diagram) to the bottom right lug
Neck Pickup 2: Hot
Next, Solder the Neck Pickup's "Hot" also known as the "yellow +" wire on the diagram to the second to the bottom lug
Bridge Pickup 1: Hot
Solder your Bridge Pickup's "Hot" (White wire on the diagram) to the second from the top lug.
Bridge Pickup 2: Ground
Solder your Bridge pickup's Ground wire to the casing of your Volume Pot
Neck Pickup 3: Neck Cover Ground
If your Neck pickup has a cover, you will need to solder it to the casing of the volume pot.
Tailpiece Ground
Lastly, Solder the ground wire that is coming from your guitars tailpiece to the casing of the closest pot. In the video example the tone pot was the closest. Please note that if you don't have a tailpiece ground, you will need a Bridge pickup with a metal plate on the bottom. The screws connecting the pickup to the bridge will turn your bridge pickup's "ground" wire into a tailpiece ground.
Output Wire Install: Hot wire
Next Solder the White "output" to the hot Lug
Output Wire Install: Ground wire
Lastly, Solder the (Colored) ground wire to the Inner Ground Lug Please note that if you don't wire these correctly and reverse the connections you will cause non stop hum
And thats it!
Test the controls before restringing the guitar by lightly taping the pickups.