Thank you for choosing Gunstreet. below is the instructions for an Oem Wiring to be installed in you Strat style guitar


Are you using a mobile device or tablet? This page is best viewed on "Desktop Site" view


OEM strat wiring.jpg
cloth wire pickups.jpg

Most Common Pickup Wire


Stratocaster Blender switch bridge
nhstrat-picsay.jpg

Pickup Install


Solder your Neck Pickup's Hot to the 3rd lug on the right (See diagram above)



mhot strat-picsay.jpg

Solder your Middle Pickup's Hot to the 2rd lug on the right (See diagram above)


strat blender middle.jpg

strat blender neck.jpg
bridge hot strat.jpg

Solder your Bridge Pickup's Hot to the 3rd lug on the right (See diagram above)



IMG_3808.JPG
IMG_3809.JPG

Solder all of your pickups grounds and the ground coming from your guitars bridge to the casing of the volume pot


IMG_3810.JPG

Solder the Hot Wiring coming from your harnesses volume control to the hot lug on the output jack.

Note* The color of the hot wire will either be White or Yellow

Solder the Ground Wiring coming from your harnesses volume control to the ground lug on the output jack.

IMG_3811.JPG
IMG_3812.JPG

That's It!

If you have any questions feel free to contact us!