Thank you for purchasing a Gunstreet harness. Below is your step by step instruction

50s j bass (2).jpg

Neck Pickup Install


j bass hot.jpg
IMG_3871.JPG

Neck PIckup Hot

Solder your pickups "Hot" wire to the Middle lug on the neck volume pot. 

Neck Ground

Finish the Neck pickup install by soldering the Neck pickup ground to the casing of the volume pot.


IMG_3872.JPG
J Bass Ground.jpg

Bridge Pickup Install


j bass hot.jpg
IMG_3885.JPG

Bridge Hot

Solder your pickups "Hot" wire to the Middle lug on the Bridge volume pot. 

Bridge Ground

Finish the Bridge pickup install by soldering the Bridge pickup ground to the casing of the volume pot.


IMG_3875.JPG
J Bass Ground.jpg

Grounding the Harness


IMG_3888.JPG

Ground the harness

Solder the ground wire coming from your bass bridge to the casing of any pot. In this case the tone pot was the best location.

IMG_3877.JPG

Testing the harness

Before you screw everything back in, test the controls by lightly tapping the pickups with the metal object.

That's It