Thank you for choosing Gunstreet. Below is the step by step instructions for your 3 way tele harness. Please note that these instructions are best used when paired with the wiring diagram we included in your box.
Are you using a mobile device or tablet? This page is best viewed on the "Desktop Site" view
Most Common Pickup Wires
Let's Start with the deconstruction
Remove the 2 plate screws
Make sure and take note of two things what color your pickup wires are and what ground wires you have. in this example the bridge pickup features a yellow and black wire and the neck is white and black
Remove the output
Next remove the output jack and remove any wires attached to the guitars wiring. Make sure once you are done to arrange the wires in a way you can remember what they are. i.e neck pickup wires together, bridge pickup wires together, and any grounds together. Install the new wiring onto the metal plate
Bridge hot output
next, solder the white neck hot output to the top left lug named "D" on the diagram below
Neck hot output
Start with the black neck pickup ground by soldering it to the bottom right lug named "1" on the diagram above
Most important Part
Next, combine the "Ground Wire" coming from your guitars Bridge pickup and the "Ground Wire" coming from your guitars actual bridge and your Necks second ground to the casing casing of the volume pot. This will ground the whole guitar stopping most buzzing when touching the metal parts. Once that is done go ahead and reinstall the metal plate to the guitar.
You can test if the wiring is working by going through the controls while lightly tapping the pickups with a metal object. If you have any questions feel free to contact us!